AL 29-4C, Special Gas Vent

Specs:

  • Tested and listed to UL1738 'Standard for Venting Systems for Gas-Burning Appliances, Categories II, III, and IV'.
  • AL29-4C can be used with Category I, II, III, and IV appliances only.
  • Sizing, system routing, system fittings, and required inner thickness must conform to appliance manufacturers guidelines. Detailed calculations and system assembly drawings must be submitted for approval.
  • AL29-4C inner liner, or 1 air space, and 430 stainless steel outer jacket.

Diameters from 3" through 36" are available. We carry boot tees, adjustable pipe lengths, drains, drain tubing, sealant, and optional 0.025" wall thickness (required for some larger BTU appliances). PV provides detailed sizing and system assembly drawings conforming to ANSI Z223.1, National Fuel Gas Code (NFPA 54), and appliance manufacturers' requirements (see PV Quality Seal).

 

 


TOP  |  HOME  |  CONTACT US  |  HELP  |

 
 

Precision Vent, Inc.  829 Pickens Industrial Dr., Suite 5  Marietta, GA 30062  TEL 678-213-1332

Contents copyright ©2004-2011. All rights reserved.
This Web site designed, developed and maintained by PVI Productions.
For technical questions or comments, please contact the Webmaster.